NEW XLR 4-Pin 12V 5A 60w UL Video Camera Audio Pro AC Power Supply Adapter

Description

We are closed on Saturdays and Sundays.
NEW
HIGH POWER® 60W Energy-Efficient Fanless
4pin XLR Power Supply for JVC/ SONY/ PANASONIC Pro Video/Audio
Input: 100-240V AC
Input AC Inlet: IEC 320 3pin (Type C14) compatible
Output Voltage: 12V DC
Ratings: 5A (60W) Continuous, 70W Peak
DC Cable Length - 120cm
DC Jack Type: XLR 4-Pin
(compatible with JVC / SONY / PANASONIC)
High efficiency design with 88% minimum at normal line input and average of 25%, 50%, 75%, 100% of max load.
Meet DOE CEC level VI
No load Power Consumption :  Less then 0.21W
Fanless AC adapter operates in total silence.
UL, cUL, TUV, CE, FCC, CCC, KC, GS, CB, DOE VI, cTick, SAA Certified
RoHS Compliant
Technical Specifications:
AC Input Voltage
Maximum Voltage: 264Vac
Normal Voltage : 100~240Vac
Minimum Voltage: 90Vac
AC Input Frequency
Maximum Frequency: 63Hz
Normal Frequency: 50~60Hz
Minimum Frequency: 47Hz
Input Current:
1.2A (Max.) @ 115Vac input will full load
0.6A (Max.) @ 230Vac input will full load
DC Output Power: 5A (60W) Continuous, 70W Peak
High efficiency design with 88% minimum at normal line input and average of 25%, 50%, 75%, 100% of max load.  Meet CEC level VI
No load Power Consumption :  Less then 0.21W
Inrush Current (cold start) : 30A Max. @110Vac/60Hz;   60A Max. @230Vac/50Hz
AC Leakage Current: 0.25mA Max. @240VAC input.
Line Regulation: This line regulation is less than ± 5%, of rated output voltage@ full load
Minimum Load: 0.0A
Hold Up Time: ≧ 5mSec., @ 115V AC input line, with full load.
Rise Time: ≦40 milli-second @ 115V AC input with full load - from 10% to 90% of output voltage.
Turn on Delay Time: The output voltage should rise to 90% of rated output voltage in less than 3 second from 115V AC applied to start up.
Over voltage protection
Short circuit protection
Over Voltage Protection
100% HI-POT tested: IEC 320 3pin primary to secondary 1800Vac 5mA 1min
100% cycling BURN-IN under 80% load for 2 hours
12V DC output @  +- 5% Standard Deviation
120mV Maximum Ripple Voltage
Operating temperature:  0 - 50 degree C
Storage temperature: -20 - 80 degree C
Humidity : Operating -  10 to 90 %;  Storage - 5 to 90 %
Altitude :  Operating - From sea level to 2,000-Meter ; Storage - 5,000-Meter
MTBF : > 50,000 hours at full load under 25 degree C ambient condition
Standard US 3-pong
AC Inlet
IEC 320 3pin (Type C14) compatible
UL Safe 3-prong AC power cord compatible
Ground pin included for extra safety over 2-prong design
Built-in power status indicator
Blue
LED turns steady on when there is a reliable 12V DC output.
LED flashes when there is a problem found by the internal detection circuitry.
LED turns off when there is no power output or no power input.
DC cable: 20AWG, 1200mm total length
Safety compliance: UL, cUL, TUV, CE, FCC, CCC, KC, GS, CB, DOE VI, cTick, SAA
Dimensions: 110 (L) * 45 (W) * 26 (H)  mm
RoHS Compliant - made with hazardous-free components
RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.
Lead-
FREE
Cadium-
FREE
Mercury-
FREE
Hexavalent chromium-
FREE
PBB-
FREE
PBDE flame retardants-
FREE
Store Policy & About us
(More on Shipping/ Return Policy / None-USA International Customers)