Inspire 1 - Charge 4+ Batteries Simultaneously - SmartPowerCharge

Description

Smart Powercharge SPC 4500 - A professional charging station for DJI Inspire 1 TB47 & TB48 batteries.
Features:
Charge 4 batteries simultaneously (up to 6 when used with the DJI RC cable);
Charge 2 remote controls at the same time with batteries;
Charge 2 USB devices such as iPad or iPhone at same time with remote controls and batteries;
Deep cycle and condition batteries according to DJI recommendation;
Auto charge batteries after DEEP CYCLE mode;
Firmware upgradable.
A smart charger is a charger that can respond to the condition of a battery, and modify its charging actions accordingly. The SPC4500 is a commercial grade QUAD Charging Station designed and built exclusively for the DJI SMART BATTERY (LiPo) that is used in your INSPIRE1. This system is MICRO-PROCESSOR controlled to ensure each battery is treated as an individual and not simply a parallel charging board or a charging hub.
The SCP4500 monitors the individual voltage and temperature to each battery ensuring that each battery is charged safely eliminating damage and LIPO safety concerns.
Safety is of utmost importance when dealing with mains power and LiPo. Smart powercharge charger includes the following protection features as standard. Short circuit protection – important when you have 26V terminals. Overload, Over voltage and Over temperature protection – the unit will shut down to provide protection and automatically reset once the offending cause is removed.
Unique to the SPC 4500 is the deep cycle function. This is an important feature to ensure the optimum health for the DJI’s smart battery. Deep cycle should be done every 10 cycles as per DJI’s recommendation.
You can even DEEP CYCLE selected batteries while charging others. To activate deep cycle mode – fly your battery to 25% or less, turn ON your battery, insert into a slot, press the red cycling button, you are done. The discharge is set to 8%. After the battery reaches 8%, the system will automatically charge the battery to full capacity.
The SPC 4500 charger is firmware updatable to keep abreast with DJI’s battery FW. Simply use the indicated USB port for future FW updates.
If you are looking for a professional solution to charging multiple batteries, the SPC 4500 meets and exceeds all FCC and CE certification.
Includes:
Smart Charger
120vac power cable
Quick Start User Guide