-40%

Diversey Vectra Floor Finish, Liquid 5 Gallon Envirobox (5105047)

$ 43.23

Availability: 82 in stock
  • All returns accepted: Returns Accepted
  • For: Hard Floor
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Item must be returned within: 30 Days
  • Form: Liquid
  • Type: Surface Cleaner
  • Model: Vectra
  • Condition: New
  • Brand: Diversey
  • Return shipping will be paid by: Buyer
  • Features: Animal Cruelty-Free

    Description

    Enhance your asphalt tile, vinyl or tile flooring with
    Diversey Vectra Floor Finish
    . This quality finish offers a diamond-like brilliance and gloss and also leaves floors with a protective coating that's resistant to embedded dirt, black heel marks, scratching and scuffing. The special formula provides long-lasting performance and is versatile enough to respond well to 175-1,500 RPM and UHS equipment. It's also designed to cure faster than traditional floor coatings and to work well in a variety of climate conditions.
    Because it complies with California 2010 VOC requirements and meets ASTM D2047 requirements for slip resistance, Vectra 5105047 is recommended for commercial and institutional use. This 5-gallon container covers approximately 10,000 square feet (2,000 square feet per gallon). A 1-gallon container is also available from 1877FloorGuy for your convenience.
    Directions:
    Block off areas to be stripped or finished. Position "wet floor" signs around the area to be cleaned.
    Strip floor using recommended Diversey stripper according to label directions.
    Apply two to three uniform coats of Vectra Floor Finish using a clean mop. To achieve a higher gloss, you may apply additional coats.
    Allow 30 minutes drying time between coats (under normal conditions).
    Maintenance:
    Dust mop or sweep then clean the floor with a mop or an automatic scrubber using the recommended Diversey cleaner following label directions.
    If desired, spray buff using recommended Diversey floor maintainer to enhance gloss.
    Before recoating:
    Dust mop or sweep then deep scrub floor using Diversey cleaner according to label directions.
    Removal:
    Remove using recommended Diversey brand stripper according to label directions.
    Notes:
    For best results: do not dilute and do not use on surfaces colder than 50 degrees F (10 degrees C).
    To avoid contamination, do not return unused product to original container.
    Floors will be slippery when wet or contaminated with foreign materials. Promptly clean spills and foreign materials and place signs in treated area.
    As with all products, test in a small, inconspicuous area before treating entire floor.
    Always read product label prior to use.
    Reference the Diversey Vectra MSDS for additional information.