Car GM7 HUD Head Up Display Car GPS Speedometer Smart Clock Decor Digital Gauges

Description

Store Categories
Store Categories
Fitness Equipment
Motors
Motors US
Other
Details
GPS speedometer: G
M
7
Special reminder: the working voltage of this product is 5V, and the voltage higher than 5V is prohibited After the satellite icon is powered on, it flashes to indicate the search star. Please move the car to the open road until the satellite icon stops flashing
Display function:
Over
-
speed alarm icon
Fatigue driving reminder icon
Display
function
: driving speed,
single
driving distance, satellite number
Speed
display bar
Compass:
N=North  E=East  W=West  S=South
Speed Unit: KM / H km MPH miles
Wave button
function
:
Vertical short press (dial press to release):
Switch to satellite number, driving distance (Change the parameter value
after entering the Settings menu
)
Vertical long press (hold the dial and hold for 2 seconds to release):
Enter the setting mode, again to save and exit
Left dial:
Switch the display interfaces. Switch the simple mode and the standard mode
Long l
eft dial
(
dial left for 2 seconds
):
T
urn off the buzzer to alarm, and dial left again for 2 seconds to open the buzzer
Right dial:
switch to display interface
s, and move the options after entering the Settings.
Setting
mode:
Manu
Function
Adjustable range
E
xplanation
Parameter value
Display screen
Speed fine-tuning
50-150
Adjust the parameter value if the speed and instrument panel instrument display 100 KM / H equipment display 105KM / H, and adjust the parameter value to 102
107
Overspeed alarm setting
0-199
Alarm when the vehicle speed reaches the set default value of 150KM / H
150
Fatigue driving reminder
1.0-8.0
Remind after exceeding the default value for 8.0 hours
8
.0
Brightness mode
0-11
0 is automatic photosensitive mode,
1-11 is manual adjustment
0
Speed Unit
0-1
0=Kilometer per Hour
1=Mile per Hour
0
Factory reset
0-1
The default is 0, change to  1, press the dial for 3 seconds to save and exit
0
Dial wheel button vertically press for 2 seconds to enter the setting item, dial wheel right to select the menu, vertical short press to enter the parameter value, adjust and vertical long press for 2 seconds to save the exit
GPS
FAQ
:
No display on the screen, no power
Check whether USB line is damaged, replace USB line test, and prohibit using voltage higher than 5V
No speed
The satellite icon flashes indicating the star search state. Please move the car to the open road and wait until the satellite icon stops flashing
Inaccurate Speed
Please check the speed unit: kilometer KM / mile MPH, (speed unit switch reference settings item 5)
When the car leaves the factory, the manufacturer increases the speed displayed on the dashboard by 5-7%, and the international standard is subject to satellite data
Fine-tune the vehicle speed, if the meter displays 100 Km/h, the machine displays 105 Km/h, and adjust the parameter value to 102
Wrong driving direction
The satellite cannot identify your driving direction without driving speed, and it can be displayed normally only after the vehicle speed exceeds 5KM/H
Speed is still displayed after the car stops
Under the underground parking lot, tunnel, under the overpass, there will be unstable satellite drift when there is obstruction.
Please driving your car to the open road.
6
.Turn off the buzzer
L
eft
dial the wave button
for 2 seconds to turn off the buzzer, do it again to turn on.
Contact Us：
It would be highly appreciated if you might contact us first once you have any problems concerning the items. And you can expect all the issues would be resolved as soon as Possible!
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
Payment Method
Returns Policy
Copyright©2017 DataCaciques
Home
Payment
Shipping
About us
Contact us
Store Categories
Store Categories
Fitness Equipment
Motors
Motors US
Other
Details
GPS speedometer: G
M
7
Special reminder: the working voltage of this product is 5V, and the voltage higher than 5V is prohibited After the satellite icon is powered on, it flashes to indicate the search star. Please move the car to the open road until the satellite icon stops flashing
Display function:
Over
-
speed alarm icon
Fatigue driving reminder icon
Display
function
: driving speed,
single
driving distance, satellite number
Speed
display bar
Compass:
N=North  E=East  W=West  S=South
Speed Unit: KM / H km MPH miles
Wave button
function
:
Vertical short press (dial press to release):
Switch to satellite number, driving distance (Change the parameter value
after entering the Settings menu
)
Vertical long press (hold the dial and hold for 2 seconds to release):
Enter the setting mode, again to save and exit
Left dial:
Switch the display interfaces. Switch the simple mode and the standard mode
Long l
eft dial
(
dial left for 2 seconds
):
T
urn off the buzzer to alarm, and dial left again for 2 seconds to open the buzzer
Right dial:
switch to display interface
s, and move the options after entering the Settings.
Setting
mode:
Manu
Function
Adjustable range
E
xplanation
Parameter value
Display screen
Speed fine-tuning
50-150
Adjust the parameter value if the speed and instrument panel instrument display 100 KM / H equipment display 105KM / H, and adjust the parameter value to 102
107
Overspeed alarm setting
0-199
Alarm when the vehicle speed reaches the set default value of 150KM / H
150
Fatigue driving reminder
1.0-8.0
Remind after exceeding the default value for 8.0 hours
8
.0
Brightness mode
0-11
0 is automatic photosensitive mode,
1-11 is manual adjustment
0
Speed Unit
0-1
0=Kilometer per Hour
1=Mile per Hour
0
Factory reset
0-1
The default is 0, change to  1, press the dial for 3 seconds to save and exit
0
Dial wheel button vertically press for 2 seconds to enter the setting item, dial wheel right to select the menu, vertical short press to enter the parameter value, adjust and vertical long press for 2 seconds to save the exit
GPS
FAQ
:
No display on the screen, no power
Check whether USB line is damaged, replace USB line test, and prohibit using voltage higher than 5V
No speed
The satellite icon flashes indicating the star search state. Please move the car to the open road and wait until the satellite icon stops flashing
Inaccurate Speed
Please check the speed unit: kilometer KM / mile MPH, (speed unit switch reference settings item 5)
When the car leaves the factory, the manufacturer increases the speed displayed on the dashboard by 5-7%, and the international standard is subject to satellite data
Fine-tune the vehicle speed, if the meter displays 100 Km/h, the machine displays 105 Km/h, and adjust the parameter value to 102
Wrong driving direction
The satellite cannot identify your driving direction without driving speed, and it can be displayed normally only after the vehicle speed exceeds 5KM/H
Speed is still displayed after the car stops
Under the underground parking lot, tunnel, under the overpass, there will be unstable satellite drift when there is obstruction.
Please driving your car to the open road.
6
.Turn off the buzzer
L
eft
dial the wave button
for 2 seconds to turn off the buzzer, do it again to turn on.
Contact Us：
It would be highly appreciated if you might contact us first once you have any problems concerning the items. And you can expect all the issues would be resolved as soon as Possible!
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
★ Your parcel will be dispatched within 1 business day after the payment is clear
★ Once you purchase, please DON’T leave negative or neutral feedback or file a claim if you haven’t received item within ebay timeframe, just contact us through ebay message.We will provide you with a satisfactory answer
Payment Method
1. Paypal is accepted only.
2. Your paypal verified address is accepted only. We highly recommend you check your address before placing any order to us.
3. Payment must be complete within 3 days from the date you purchase or after the end of auction. Items unpaid within 3 days of the auction end will be forfeited. We reserve the right of cancel the order and re-selling the items.
Returns Policy
1. Products may be returned for refund or replacement within 30 days of the purchase date.
2. Prior to any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense.
3.We will try our best to ensure that your return is processed promptly and without hassle. Please contact us for any product or service issues before escalating to eBay for solution.