220V Enameled Wire Stripping Machine Varnished Stripper Copper Stripper Enamel

Description

1. When the enameled wire is of different specifications, the adjustable speed potentiometer (handheld) or the adjustable speed governor (fixed type) can be adjusted. The wire diameter is small in the slow direction, and the wire diameter is adjusted in the fast direction.
If the film is not peeled off, the rotation speed is increased until it is scraped. If the enameled wire is cut by a scraper during speed regulation, the speed should be reduced until it meets the requirements. According to the above method, the most suitable rotation speed is selected as the working speed of the corresponding wire diameter, which can be considered to have been adjusted.
2. When scraping the paint to the end of the enameled wire, do not immediately disengage the three blades. The intersection of the cutting edge should wait for the tool to stop rotating and then disengage, so as not to rotate, the enameled wire suddenly breaks off the cutting edge and damages the cutting edge.
3. The outer casing is made of voltage-resistant plastic material, which is safe and reliable.
4, before the enameled wire scraping paint, you must manually straighten the hand, to avoid the enameled wire is not allowed to the center of the cutting edge.
5. After using for a long time, under the condition that the power supply is not available, the safety cover can be unscrewed to remove the peeled paint film powder.
Package Contents:
1* Enameled Wire Stripping Machine