-40%

(10)604ZZ Bearing 4x12x4 mm Miniature 604 Z ZZ Ball Bearings 604-2Z ABEC-5

$ 4.74

Availability: 20 in stock
  • Item Length: 12 mm
  • Number of Items: 10
  • Item Height: 4mm
  • Part Type: 604ZZ
  • Model: 604zz
  • Brand: FUSHI
  • Set Includes: Derailleur (Rear)
  • Item Width: 4 mm
  • For Component: Hub/Wheel
  • Color: Silver
  • Item Weight: 2.1g
  • Item Diameter: 4 mm
  • Material: Steel
  • Condition: New
  • Compatible Bike Type: Cargo Bike
  • Country/Region of Manufacture: China
  • Bearing Type: Loose Ball Bearings

    Description

    Miniature Bearing Features
    Miniature Bearings can sustain some axial load in either direction as well as radial loads, And the two raceway cross-sections are simple circular arcs which can be very precisely finished so the bearings have low friction and very little noise or vibration. Several different cage designs are available with different characteristics and the choice depends upon the individual application.
    TECHNICAL SPECS
    Model: 604-ZZ Inner (d): 4 mm Outer (D): 12 mm Width (B): 4 mm Qty: 1 Lot = 10 Pcs
    This Bearing Structure
    Standard Type: A ball bearing is composed of an outer and inner ring, balls, seal and a retainer. Open type will no seal, Flanged type with flange side.
    This Bearing Cover
    Compared to the open type, the shielded and sealed bearing types provide better protection from contamination and grease leakage. They are selected based on the application type and environment. This is ZZ double shields.
    This Bearing Lubrication
    One of the most important elements required for the effective function of bearing arrangements is correct lubrication. The lubricant separates the metallic bearing surfaces and thereby reduces friction, preserves the steel parts and acts as an additional barrier against the entry of contaminations or impurities into the bearings.
    This Bearing Cage
    Retainers keep the balls separated and equally spaced. Retainer types are set based on the bearing size but can be selected based on the required performance. This is made of Nylon PA66 Cage.
    This Bearing Material
    The most common material used to produce the load carrying components in roller bearings is 52100 chrome steel (bearing steel). These components are the bearings inner and outer rings, balls and rollers. The chemical composition of this steel has high carbon and about 1.5% chromium content. Using controlled processing and heat-treating methods the finished bearing components have high strength to resist cracking and a hard surface to resist subsurface rolling contact fatigue. The typical surface hardness for bearing components made from this material ranges from 60- 64 on the Rockwell hardness C scale (Rc).
    This Bearing Balls
    Due to this usually very small contacting area ball bearings have less frictional resistance and are more suitable in high speed applications. This is made of 52100 chrome steel.
    This Bearing Clearance
    The term “clearance” is briefly described as the distance that bearing components may move relative to each other at physical extremes. CN (C0) “normal” clearance This clearance group is defined as the standard. Thus CN is not marked on the bearings. Historically the standard clearance was designated as “C0“. C2 clearance range smaller than CN C3 clearance range larger than CN
    This Bearing Grade
    Executive standard: GB/T 307.1-2005 Rolling bearings Radial bearings Tolerance
    MORE BEARINGS DETAIL
    FEEDBACK & OUR SERVICE